KONNWEI KW208 Car Battery Tester 12V 100-2000CCA Cranking Charging Test Analyzer
KONNWEI KW208 is able to effectively analyze and read important car data such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status.
Automotive Car Battery Tester:
As one of the most cost-effective products, KW208 can test all 12V 100-2000CCA batteries including regular flooded, AGM flat plate, AGM spiral, or gel batteries. Provide overall analysis of batteries’ health and help you know its status in advance before it dies. KW208 battery tester support cranking and charging system test also alternator and starter test.
Display Overall Batteries Data:
KW208 12V Battery Load Tester gives you the basic battery parameters such as voltage, internal resistance, cold cranking amp, battery health, and charge status. Additionally, the battery CCA tester will also show you professional advice on whether to replace or charge the battery.
>99.5% Accuracy:
Thanks to KW208’s powerful STM-32 chip, it provides more than 99.5% precise testing reports within milliseconds(testing results refer to US Midtronics), greatly improved the testing speed compared to other battery testers.
Plug and Play:
KW208 Battery load analyzer allows you to test batteries both in-vehicle and out-of-vehicle and even test dead batteries. Just connect the tester’s clips with the battery then it will turn on and ready to test and analyze the battery. It’s that easy.
Starter and Alternator Tester:
KW208 not only a great battery load tester that tests battery cranking and charging systems but also can test the alternator's charging and starter's cranking conditions. And it can switch up to 8 languages for different needs.
Function :
System voltage 12 Volts and Voltage test in waveform
Test Result Good, Recharge or Replace
Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating. Internal resistance value (mΩ) and Life in percentage (%)
Cranking system and Charging system
Record and re-play battery data, Life-time free update service
Battery test, cranking test, charging test and other additional functions.
The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,GB,DIN and IEC are supported.
Feature :
Measure Standard ,CCA 100-2000 ,BCI 100-2000 ,CA 100-2000 ,MCA 100-2000,
JIS 26A17-24SH52 ,DIN 100-1400 ,IEC 100-1400 ,EN 100-2000 ,SAE 100-2000,
GB 100-1400,System Voltage 12 Volts ,Input Voltage Range 8V-16V ,Power Requirements are no internal batteries required,Power on when hooked up during testing.
KW208 battery tester key functions & features:
1.System voltage: 12 Volts
2.Test Result: Good, Recharge or Replace
3.Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
4.Internal resistance value (mΩ)
5.Life in percentage (%)
6.Cranking system
7.Charging system
8.Voltage test in waveform
9.Battery test, cranking test, charging test and other additional functions.
Package includes:
1*KONNWEI KW208 Car Battery Tester
1*User’s Manual
